585,692 active members*
4,921 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > ArtCam Pro > Need Help. Z axis getting Deeper

Thread: Need Help. Z axis getting Deeper

Results 1 to 2 of 2
  1. 03-08-2022, 09:57 PM #1
    abdulwaheed
    abdulwaheed is offline
    Join Date
    Mar 2020
    Posts
    1

    Need Help. Z axis getting Deeper

    Hi..!
    i have a problem in making a v carve tool path it start perfectly but suddenly my z axis getting deeper through the material.
    operating software: Mach3
    Designing software : Aspire V10.5 And ArtCAM 2018
    Reply With Quote Reply With Quote
  2. 03-09-2022, 12:32 AM #2
    joeavaerage
    joeavaerage is offline Member
    Join Date
    Nov 2013
    Posts
    4358

    Re: Need Help. Z axis getting Deeper

    Hi,
    the two most likely problems are:
    1) The tool is pulling out of its collet and therefore protruding more as time progresses
    2) The Z axis is losing or gaining steps. Electrical noise interference is a possibility as is the stepper being marginally overloaded at the speed of operation.

    Craig
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Z axis suddenly goes deeper while machining
    By zapperone in forum Chinese Machines
    Replies: 11
    Last Post: 06-25-2021, 05:28 AM
  2. Z Axis slipping deeper
    By vangalvin in forum Linear and Rotary Motion
    Replies: 4
    Last Post: 12-13-2018, 12:08 AM
  3. Z axis cutting deeper than expected
    By bitsa in forum Chinese Machines
    Replies: 3
    Last Post: 11-08-2015, 08:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules