Hello
Have done a lot of search/trace . but the last relay of the saf module will not com .
Have changed All relays in safety module . saf module have 6 led's .But cannot figure out why the last relay (Y8.0) is not coming . It seems to be a loop that the setting is actually dependent of that the relay itself operates...
if anyone wants to help , I have doc on ladder/PMC prog (ladder) / el diagrams ..
best regards
Ulf
Results 1 to 2 of 2
-
03-17-2022, 05:34 PM #1
Member
- Join Date
- May 2019
- Posts
- 10
SL-300 (1998) Alarm EX2058 safety circuit
-
03-19-2022, 12:37 PM #2
Member
- Join Date
- May 2019
- Posts
- 10
Re: SL-300 (1998) Alarm EX2058 safety circuit
Found that there where a combination of bad contact on the safety relay , and the nc contact on the KM1
Reply With QuoteSimilar Threads
-
alarm EX2058
By ponnapeou in forum Mori Seiki MillsReplies: 4Last Post: 12-05-2022, 01:53 PM -
Alarm 160 1998 Haas VFE
By alpydawg in forum Haas MillsReplies: 5Last Post: 08-05-2018, 07:06 PM -
Improving Centroid Acorn reference safety circuit
By pfmcnamara in forum Centroid CNC Control ProductsReplies: 4Last Post: 04-26-2018, 04:42 AM -
DISABLE SAFETY CIRCUIT
By charlybur69 in forum Haas MillsReplies: 1Last Post: 06-06-2017, 04:27 AM -
VF-1 1998 alarm 179
By joanpim in forum Haas MillsReplies: 5Last Post: 03-26-2009, 07:48 PM
Tags for this Thread
Posting Permissions
