Hello. the first image is a svg file created in Inkscape. the 2nd file is a outline of the svg file, i saved the outline image and imported it into fusion 360 to engrave but it won't do it just hogs out the middle. Is there a way to do this thank you for any help.
Thread: fusion360
Results 1 to 6 of 6
-
03-19-2022, 02:46 AM #1
- Join Date
- Aug 2019
- Posts
- 23
fusion360
-
03-19-2022, 03:34 AM #2
- Join Date
- Jun 2021
- Posts
- 105
Re: fusion360
What F360 tool and operation are you choosing?
-
03-19-2022, 04:08 AM #3
Member
- Join Date
- Oct 2019
- Posts
- 2
Re: fusion360
Hello I'm using 90 degree v bit and engraving
Originally Posted by TMToronto
-
03-19-2022, 04:10 AM #4
Member
- Join Date
- Oct 2019
- Posts
- 2
Re: fusion360
I have tried tracing with no luck. My boader is 95x214x14mm
-
03-19-2022, 06:40 AM #5
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: fusion360
Looks like Fusion thinks your outline is a solid. Try playing with Project. It should project the outline onto a surface that you can then engrave using Trace.
https://www.youtube.com/watch?v=gIRWznHnmjkJim Dawson
Sandy, Oregon, USA
-
03-19-2022, 04:58 PM #6
Community Moderator
- Join Date
- Nov 2014
- Posts
- 724
Re: fusion360
Moved to Autodesk CAM forum where more F360 folks will see this. Nice looking guitar, btw!
David
Romans 3:23
Etsy shop opened 12/1/17 - CurlyWoodShop
Reply With Quote
Similar Threads
-
Tiling with Fusion360
By Project_Hopeless in forum Autodesk CAMReplies: 5Last Post: 05-12-2021, 10:49 PM -
Stl to a solid fusion360??
By CnCustoms in forum AutodeskReplies: 6Last Post: 04-14-2021, 02:49 AM -
Fusion360 post
By yugami in forum MilltronicsReplies: 11Last Post: 04-15-2019, 09:36 AM -
Rotary around Z fusion360
By dbunyip in forum Tormach Personal CNC MillReplies: 0Last Post: 01-04-2018, 12:41 PM -
Posprocessor Fusion360 for Kflop
By ukr_sasha in forum Dynomotion/Kflop/KanalogReplies: 1Last Post: 08-27-2017, 07:31 PM
Tags for this Thread
Posting Permissions
