Hi , i own a laser cutter bought 5 years ago. I have changed power supply and laser tube and the power can't be adjusted. The miliamps at the gauge is 16 even if the power is 20% or 70%?
I have reinstall the software with no results. Any solutions ?
Hi , i own a laser cutter bought 5 years ago. I have changed power supply and laser tube and the power can't be adjusted. The miliamps at the gauge is 16 even if the power is 20% or 70%?
I have reinstall the software with no results. Any solutions ?
The most possible reason is that the analog line from the system to the power supply is broken or loose.