Register now for the 'Up-To-Date Post-Processors - Part 6' webinar -

https://register.gotowebinar.com/reg...78840787494671

Presented by Danijel Durica

DATE: March 30, 2022
TIME: 1:00 pm GMT / 8:00 am US Eastern US

We are happy to announce and continue the “Up-To-Date” Post-processor webinar series that will bring your knowledge and Post-Processors writing routine to another level.

In this webinar, we will demonstrate the most important updates available in the latest SC2021 SP4 release, such as:

Implementing Sub-Tools based on controllers
Indexed Revolver tool call
Interpolation for distance usage
New Machine Simulation structure
…and more
We will also discuss how to put across the conversion of Cutter cutting points from earlier versions.
We will give you a chance to send us your thoughts and subjects that you would like to be discussed next in this webinar series.

In this webinar series, the latest Visual Studio Code with GPP Plug-in will be used.

To install the Visual Studio Code please download the instruction document here.

The webinar is meant for all who already have knowledge about the basics of GPPL Syntax.

https://register.gotowebinar.com/reg...78840787494671