Greetings,
I have a lathe chuck here at the shop that I did not purchase. It is mounted on a plate for mill use. The chuck has no markings of who made it, other than being manufactured in China. It also has solid 1 way jaws.
The jaw dims are 27mm x 70mm x 106mm. Slot dims 5.1 deep x 10 wide.
I would like to find hard jaws that will work on this chuck that I can attach aluminum pie jaws to. But I'm not finding anything that is close to matching the solid jaw dimensions.
Any help pointing me to where I can find something would be greatly appreciated.
Tom