Hi
I'm trying to shift my work away from the clamps.
By changing my G98 command from
"G98X0.Y0.I90.J0.P2K0"
to
"G98X0.Y50.I90.J0.P2K0"

according to the textbook, this is supposed to move the grid 50mm further away from the clamps.

Instead, I have found that irrespective of what value I enter into the X and Y parameters of G98, the machine always uses X0.Y0. as its zero point. Thus making the entire G98 function, the only function for specifying grid origin, functionally useless.

Guys... What am I missing? The user manuel tells you one thing and the machine does another.