[RaceFan]

Hello, I have EZ Guide on my Doosan 5025 with Fanuc 21i control.
I accidentally deleted all programs(including 9001 tool change program) and was wondering if EZ Guide was windows based and if there might be a trash folder somewhere?
Or is there anyway I can recover the part programs?
Thanks

[Pickle_Nick]

Unfortunately, If you do not have a backup, you cannot get these back. Your best bet would be to contact the person you purchased the machine from and see if they have a backup. That way you can at least get the 9000 programs back.

[RaceFan]

I was able to rewrite the 9001 program to do tool changes, plenty available online and its only 5 or lines long. Only 9000 program I had
It is crazy to me how easy it is to delete all the programs through EX Guide.
NOTE - do not have a program 71, seven corresponds to the 7th soft key(delete all programs) and 1 to soft key (yes to confirm)

[zavateandu]

you should have the parameter 3202.5(NE9) to 1 to protect from deleting the 9000 programs