I have a 4'x4' gantry, 220VAC spindle at 2.2KW with VFD, 4 Gecko 203V's, 60VDC 10 amp drives power, Nema 23 400 oz/in steppers @ 3mh. I have a 10:1 gear reduction for the Z axis. And run the Y with one motor slaved to the other.
The controller is an Acorn CNC, and I use Vectric Desktop.
Anyone else have a similar set up?
Results 1 to 7 of 7
Threaded View
-
05-16-2022, 10:24 PM #1
Member
- Join Date
- May 2022
- Posts
- 4
Anyone using 203V's with Acorn board from Centroid?
Reply With QuoteSimilar Threads
-
Centroid Acorn Board Paired W/ a Old MicroProto Systems Driver Box
By killacamm in forum DeskCNC Controller BoardReplies: 4Last Post: 03-18-2023, 03:13 PM -
Centroid Acorn experiences?
By steve_p in forum Centroid CNC Control ProductsReplies: 62Last Post: 07-15-2020, 12:49 AM -
Centroid Acorn on Plasma
By Nucla in forum Centroid CNC Control ProductsReplies: 0Last Post: 06-03-2019, 03:04 PM -
My Experience with Centroid Acorn
By SCzEngrgGroup in forum Centroid CNC Control ProductsReplies: 80Last Post: 05-04-2018, 02:15 AM -
Centroid Acorn interview
By bgriggs in forum Centroid CNC Control ProductsReplies: 1Last Post: 01-18-2018, 08:19 PM
Tags for this Thread
Posting Permissions
