Re: Fanuc AC Servo Motor schould it turn ?
Originally Posted by
beemergb
My Bridgeport interact 720 has a Fanuc AC SAervo Motor on the Z axis , model 10 Typpe RO6B -0501 -B202 # 7000 , Ive put it back on the machine after moving into new premises , it was to high to get through he door ! Ok ,put it back on now I get fuses trppinbg out when I plug the sockets in the back og the ofthe n motor ! Ive taken the motor of again just incase Iveb done some thing wrong , and notice you cant turn ther motor on the axle / flange ,it moves a coupüle of thou and klonk both ways ! Can you normally turn the motor when off the machine ? Hope you can help thank you Harry
Place the plugs in one at a time to see which blows the fuse the brake, encoder and power are separate plugs.
Did you identify the fuse for which function?
I retro-fitted one on my shop lathe using a Fanuc servo motor that had the brake on it, the brake does show some slight play when it is on, (power off)
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.