584,860 active members*
5,100 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > PlasmaCam > Purchased DHC at Auction with no computer/software
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2008
    Posts
    30

    Purchased DHC at Auction with no computer/software

    Finally got the PlamaCam Gods to transfer the machine (41xxx). I'm not opposed to upgrading to DesignEdge, but I don't want to be throwing money away if the controller/motors are trash- I have several CNC machines with Mach3/4 and can also go that route.
    Does anyone have 3.04 / 3.11 software for a DHC machine. Thank You, Bill

  2. #2
    Join Date
    Aug 2022
    Posts
    2

    Re: Purchased DHC at Auction with no computer/software

    Quote Originally Posted by CNC Bill View Post
    Finally got the PlamaCam Gods to transfer the machine (41xxx). I'm not opposed to upgrading to DesignEdge, but I don't want to be throwing money away if the controller/motors are trash- I have several CNC machines with Mach3/4 and can also go that route.
    Does anyone have 3.04 / 3.11 software for a DHC machine. Thank You, Bill
    go to plasmaspider forum and ask santa might show up

Similar Threads

  1. Replies: 2
    Last Post: 11-26-2012, 01:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •