Is it possible after tool breakage to change to a new tool and to keep machining?
"M129"
"TCH PROBE 586 TOOL BREAKAGE DETECT ~"
"Q356=+1 ;MEAS. DIRECTION ~"
"Q357=+0 ;RADIAL OFFSET ~"
"Q359=+0 ;CORR. TO CORE LENGTH ~"
" Q375=+0 ;APPROACH STRATEGY ~"
"Q376=+50 ;SAFETY DISTANCE"
"TOOL CALL 1 S6642"
Results 1 to 2 of 2
-
05-25-2022, 02:06 PM #1
- Join Date
- May 2022
- Posts
- 1
TNC 640 change to new tool after tool breakage Help
-
05-25-2022, 05:22 PM #2
Registered
- Join Date
- Mar 2016
- Posts
- 323
Re: TNC 640 change to new tool after tool breakage Help
U have to set spare tool in tool table.
Reply With QuoteSimilar Threads
-
Change tool locations in tool table after breaking tool pocket
By cossiegaz in forum SIEMENS -> GENERALReplies: 0Last Post: 12-23-2019, 11:26 AM -
Solidcam tool breakage and tool measurement to postprocessor
By Daniel0606 in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 0Last Post: 01-11-2019, 11:30 AM -
Datum Shift-TNC 426/430M & Tool change position problem
By wahidbashir in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 11-15-2016, 05:37 PM -
Tool breakage
By cncmechaniz in forum PollsReplies: 0Last Post: 07-18-2013, 12:45 AM -
EIA in fusion 640 wont tool change
By mikey B in forum Mazak, Mitsubishi, MazatrolReplies: 15Last Post: 08-10-2011, 02:20 PM
Tags for this Thread
Posting Permissions
