Re: Cutting Aluminum Sheets.
Seem like work piece is hold down good enough and the speed is too slow plus no cooling to flush out the chip, it getting right back into the cutting edge.
Can't see what the job is like to can't give any idea how to hold the pieces, .06 thick Aluminum with a decent with cnc should has no problem cutting it.
- - - Updated - - -
Seem like work piece is hold down good enough and the speed is too slow plus no cooling to flush out the chip, it getting right back into the cutting edge.
Can't see what the job is like to can't give any idea how to hold the pieces, .06 thick Aluminum with a decent with cnc should has no problem cutting it.
The best way to learn is trial error.