584,808 active members*
5,158 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2022
    Posts
    2

    Fiber laser cutting machine alarm

    Hello everyone!
    I have bought a new Fiber Laser metal cutting machine 4 months ago - 2000W. Its with Raycus generator.. The machine quality is very good (for those who will ask me), and the manufacturer is trusted - there was no problem with the order and the delivery.

    I am struggling to start the machine and i have alarms on x and y limits. the operating system is Cypcut software.
    What I saw is that the cutting head is out of range and I cannot put it to be in range. I will attach also some photos to be more specific.

    I appreciate your help.
    Thanks
    Attached Thumbnails Attached Thumbnails A457A6EE-E0A8-43DF-B403-F0B1485DFFA3.jpg   0BE46217-8713-4FB0-BBD2-C53098D0AB89.jpg   D22F8890-A9B3-4B48-8517-51DDA579A25F.jpg  

  2. #2
    Join Date
    Mar 2022
    Posts
    2

    Re: Fiber laser cutting machine alarm

    Maybe you can share more detals.

  3. #3
    Join Date
    May 2022
    Posts
    2

    Re: Fiber laser cutting machine alarm

    When I start the machine and click to go origin I have this limit alarms on x and y.
    The x axis goes in the margin and stop there. It did not roll back. The same is with y axis.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •