[ballistic42]

I replaced motor and spindle and now trying to align the belt. I have the one GTR belt. Going forward the belt rides right in the middle of the pulley and won't move. when I go into reverse the belt starts to walk down to the bottom of the pulley. Any idea why the belt will not move from center going forward but in reverse the belt goes to bottom of pulley? Any help would be great.

Thanks

[Algirdas]

check with sensitive indicator. Axes are not in parallel.

[ballistic42]

check with sensitive indicator. Axes are not in parallel.

That sounds like a great idea thought of that but not sure where to mount the mag base and where to take the measurement from. Any suggestions of how to do that? Fadal has nothing in the manuals of how to go about this!

[ballistic42]

I replaced motor and spindle and now trying to align the belt. I have the one GTR belt. Going forward the belt rides right in the middle of the pulley and won't move. when I go into reverse the belt starts to walk down to the bottom of the pulley. Any idea why the belt will not move from center going forward but in reverse the belt goes to bottom of pulley? Any help would be great.

Thanks

Problem fixed. I did not have the pulleys set at the correct height per the maintenance manual. A member sent me the picture of the correct information to set the heights. The pulleys are aligned the right way now and no problems. Shout out to Skinner!

Jeff