585,932 active members*
3,684 visitors online*
Register for free
Login

Thread: test the spindle from China

Results 1 to 5 of 5

Threaded View

  1. 06-06-2022, 03:07 PM #1
    RudolfNL
    RudolfNL is offline Banned
    Join Date
    May 2022
    Posts
    4

    test the spindle from China

    I received the spindle, ordered it in China. It was suspiciously cheap.. I checked the beating on the cone - 2-3 thousandths, then put the mandrel under the tool - the beating of 4-6 thousandths. It seems normal. Then I plugged it in, it rotates gently and without vibrations. How else do I test the spindle?
    Attached Thumbnails Attached Thumbnails IMG_20220503_133503.jpg   IMG_20220503_143939.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. spindle stop / mount test indicator
    By averageJoe576 in forum Taig Mills / Lathes
    Replies: 2
    Last Post: 05-22-2018, 03:12 AM
  2. Milltronics VM-17 vfd spindle enable, spindle test.
    By plane captain in forum Milltronics
    Replies: 5
    Last Post: 02-10-2016, 04:36 PM
  3. Spindle Test Porter Cable Vs. Bosch
    By Cartierusm in forum DIY CNC Router Table Machines
    Replies: 24
    Last Post: 05-08-2008, 11:59 PM
  4. First test of Series I Boss 6 mill? Spindle inop...
    By Mr. Technical in forum Bridgeport / Hardinge Mills
    Replies: 10
    Last Post: 07-13-2007, 05:12 AM
  5. spindle test
    By 69owb in forum CamSoft Products
    Replies: 4
    Last Post: 06-10-2007, 03:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules