We are trying to upgrade our failing PC. When I try to install Fabriwin 9.2, it installs the Sentinel drivers, but before the software installs Fabriwin, it says that it cannot find the keylock/dongle, and will not install the software. It is plugged into the port as it should be. Any suggestions?
Results 1 to 2 of 2
-
06-06-2022, 04:16 PM #1
Registered
- Join Date
- Dec 2014
- Posts
- 9
Fabriwin not seeing keylock/dongle, trying to install on replacement PC Amada Vela 2
-
06-10-2022, 07:59 AM #2
Member
- Join Date
- Mar 2022
- Posts
- 10
Re: Fabriwin not seeing keylock/dongle, trying to install on replacement PC Amada Vel
contact me, E-email
Reply With QuoteSimilar Threads
-
Amada Vela 2 PC upgrade possible? Fabriwin is not seeing the keylock dongle.
By generalcrafts in forum Bending- and Punching MachinesReplies: 2Last Post: 01-25-2023, 09:05 PM -
Post Processor/driver for Amada Laser/Fabriwin
By JTGam1 in forum Post Processor FilesReplies: 0Last Post: 04-12-2017, 06:08 PM -
Need punch sequencing advice (Amada/Fabriwin)
By cdoss in forum Uncategorised CAM DiscussionReplies: 2Last Post: 04-23-2015, 10:05 PM -
AMADA VELA II FANUC-V 6m System error 032 **
By erickortiz in forum FanucReplies: 0Last Post: 11-27-2014, 09:00 PM -
Amada vela 2 parameter list for 20h motor
By snow282 in forum FanucReplies: 0Last Post: 09-21-2010, 05:03 PM
Tags for this Thread
Posting Permissions
