CC200 ... "Position error" (194) on X-axis, when max feedrate is over 4m/min - but only in one direction - after several engine rotation (a different distance each time). In the opposite direction on X-axis is speed 10m/s without any problem.
Where could be problem ? Why one direction only ?
Thread: Position error 194 on CC200
Results 1 to 2 of 2
-
06-06-2022, 09:54 PM #1
Registered
- Join Date
- Sep 2011
- Posts
- 9
Position error 194 on CC200
-
06-16-2022, 09:22 AM #2
Registered
- Join Date
- Sep 2011
- Posts
- 9
Re: Position error 194 on CC200
Differently wide pulses A and B from Rod320. Fixed by changing the position of the incident light on the sensors in ROD320.
Reply With QuoteSimilar Threads
-
Bosch CC200
By alanser in forum Bosch RexrothReplies: 2Last Post: 07-31-2012, 07:27 PM -
Yaskawa Servopack error: A.D1. Motor Load Position Excess Error
By Syphonics in forum Servo Motors / DrivesReplies: 0Last Post: 04-26-2012, 07:53 AM -
Alarm 194 on MDC500
By dcoupar in forum Haas MillsReplies: 2Last Post: 04-23-2009, 06:27 PM -
cc200 T programming
By WEMASERV in forum Bosch RexrothReplies: 1Last Post: 10-20-2008, 08:03 PM -
Help, VF OE: alarm #194
By teal854t in forum Haas MillsReplies: 4Last Post: 03-17-2008, 06:18 PM
Tags for this Thread
Posting Permissions
