584,850 active members*
4,330 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2022
    Posts
    1

    deckel FP5NC Dialog 4

    Hello to everyone.
    Can someone please help me?
    I've buy this Deckel a week ago, and I have also get the 4th axis. But I can't bring the 4th axis to life.
    If someone could help me, I would be realy thankful.
    BR
    Matej
    Slovenia
    Attached Thumbnails Attached Thumbnails IMG_20220529_181251.jpg   IMG_20220530_074113.jpg   IMG_20220530_074125.jpg   IMG_20220602_215415.jpg  

    IMG_20220602_221713.jpg  

  2. #2
    Join Date
    Feb 2008
    Posts
    52

    Re: deckel FP5NC Dialog 4

    Hello,
    i am not shure, that is your problem but i try to explain. i need to tell this is over 20 year ago i not something.
    1. power off the control (not the machine)
    2. press F5 -> tables
    - z-axis always on
    - angle table on = round table off
    - nc round table on = 4th axis on
    3. power on controller
    4. button MODE -> Text -> F2 (4 Axis)
    5. BA1 -> next step -> F1 (referenzpoint) -> choose X-Y-Z-C

    Thats what i have write down before 20 years. maybe it brings you forward.

    edit: excuse. it was a Dialog 11.

  3. #3
    Join Date
    Sep 2023
    Posts
    2

    Re: deckel FP5NC Dialog 4

    The above instructions won't work on the Dialog control you have.

    Did you get this running?
    Looks like you are missing the NZP59 board for the 4th axis

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •