Hi guys I have this purple cable from a DMG DECKEL MAHO (fanuc control) (fanuc handy Mac hand wheel , A02B-0259-C2210
Cut off from the female side of it
The side that connects to the CNC control
Part number HR22-12TPD-20S
Wondering if there is someone out there with the same machine or cable and if you can help me with Ohming out the Color code and which is which
Much appreciated
Results 1 to 6 of 6
Threaded View
-
06-11-2022, 02:47 AM #1
- Join Date
- Jun 2022
- Posts
- 28
FANUC CABLE 19 pin connector cut off need help with configuring Color code
Reply With QuoteSimilar Threads
-
Serial Pinout for Fanuc 6T 20-pin Honda Connector
By jbmozer in forum FanucReplies: 3Last Post: 03-17-2015, 01:22 PM -
Microkinetics NM400E Cable SCSI50M to DB25M Cable Pin-Out
By Contract_Pilot in forum Stepper Motors / DrivesReplies: 2Last Post: 10-01-2014, 10:29 PM -
I need help with Fanuc pin-assignment connector (JF-1 / the pulse coder cable)
By nice-day in forum FanucReplies: 2Last Post: 02-12-2014, 06:16 PM -
Help configuring MIC-01 cable
By fanefane in forum Waterjet General TopicsReplies: 0Last Post: 03-10-2012, 06:36 PM -
10 pin connector help
By Rees Guitars in forum Controller CardsReplies: 2Last Post: 01-20-2008, 07:29 AM
Tags for this Thread
Posting Permissions
