584,837 active members*
5,145 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > Trumatic TC260 machine error RAM UP OVERLOAD.
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2019
    Posts
    4

    Trumatic TC260 machine error RAM UP OVERLOAD.

    Last week the machine worked perfectly. Today we switched it ON and an error appeared 3 secs after running the hydraulic.The lowest valve in that block of valves on hydraulic pump lights with red LED but I am not sure whether this valve is connected to the RAM. Any idea?

  2. #2
    Join Date
    Nov 2021
    Posts
    12

    Re: Trumatic TC260 machine error RAM UP OVERLOAD.

    accumulators or lineal amplifier problem

Similar Threads

  1. trumatic tc260 with sinumerik 880 need help
    By Kocka in forum SIEMENS -> GENERAL
    Replies: 1
    Last Post: 09-05-2023, 01:54 PM
  2. Trumpf Trumatic 260Rotation - error message
    By Ladis666 in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 12-27-2019, 07:38 AM
  3. Error 55 motor overload (T1)
    By carbidecraters in forum Mazak, Mitsubishi, Mazatrol
    Replies: 64
    Last Post: 11-27-2019, 01:05 PM
  4. error #8 motor overload
    By charliemisa in forum Fadal
    Replies: 2
    Last Post: 04-07-2010, 05:19 AM
  5. Error #10 Motor Overload
    By emt2688 in forum Fadal
    Replies: 3
    Last Post: 11-19-2009, 04:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •