I think I have seen that information somewhre but can't find it again.
What is the maximum current Rating for the following:
- Single Output.
- Total Outputs.
- 5V powersupply on the OUT connector.
- 3.3V powersupply on the AUX connector.
The reason for that question is, that I have some optocoupler boards which reqires 5V for the status LED's and I wan't to supply that from the controller to ensure the isolation from input to output.
Thread: Maximum current of outputs.
Results 1 to 1 of 1
Hybrid View
-
06-21-2022, 08:55 AM #1
- Join Date
- Jan 2022
- Posts
- 107
Maximum current of outputs.
Reply With QuoteSimilar Threads
-
Matching stepper driver to motor (motor current equal to the driver maximum current)
By xa19 in forum Stepper Motors / DrivesReplies: 1Last Post: 03-22-2021, 01:57 AM -
Safe maximum current for 40w c02 laser tube
By glavey in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 12-13-2016, 02:27 PM -
Combine two plasma cutter outputs to double current to torch..???
By scarlaton in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 2Last Post: 08-16-2015, 07:45 PM -
wiring check please. parallel wiring to maximum current to servo motors
By Novett in forum CNC Machine Related ElectronicsReplies: 3Last Post: 10-11-2014, 07:54 PM -
High current on the PIC outputs?
By 3dfernando in forum Stepper Motors / DrivesReplies: 0Last Post: 05-29-2009, 05:35 PM
Tags for this Thread
Posting Permissions
