585,933 active members*
3,597 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > Spindle won't turn on VM5020

Thread: Spindle won't turn on VM5020

Results 1 to 3 of 3
  1. 06-22-2022, 11:03 PM #1
    bencody3001
    bencody3001 is offline
    Join Date
    Jun 2022
    Posts
    2

    Spindle won't turn on VM5020

    When looking at diagnostics the zero speed input is on. When I do a tool change the spindle will orient itself correctly, but when I try to turn on the spindle (s2000 M3), it doesn't spin but I am getting V1-01= 66.5Hz on the drive. I am not getting any faults. The screen shows that I turned the spindle on but shows no load.
    Reply With Quote Reply With Quote
  2. 06-22-2022, 11:23 PM #2
    CNCMAN172
    CNCMAN172 is offline Registered
    Join Date
    Jun 2005
    Posts
    1730

    Re: Spindle won't turn on VM5020

    If your VFD has a speed knob you could change one parameter in the drive and see if it spins when using VFD panel interface
    Reply With Quote Reply With Quote
  3. 06-23-2022, 04:05 PM #3
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: Spindle won't turn on VM5020

    Quote Originally Posted by bencody3001 View Post
    When looking at diagnostics the zero speed input is on. When I do a tool change the spindle will orient itself correctly, but when I try to turn on the spindle (s2000 M3), it doesn't spin but I am getting V1-01= 66.5Hz on the drive. I am not getting any faults. The screen shows that I turned the spindle on but shows no load.
    Check that all the I/0 relays are working it seems your ON /Off Relay is not working, or you have a broken wire
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Tree 310 Spindle Won't Turn--Is there a Spindle Brake or Lock?
    By UtahSmitty in forum Tree
    Replies: 15
    Last Post: 08-06-2022, 05:14 AM
  2. Spindle won't turn off
    By CarbonMan in forum Chinese Machines
    Replies: 0
    Last Post: 07-01-2020, 08:00 AM
  3. Spindle won't turn on
    By aksu74 in forum Tormach Personal CNC Mill
    Replies: 15
    Last Post: 04-22-2012, 12:26 PM
  4. Spindle won't turn on
    By ranchak in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 08-30-2009, 12:32 AM
  5. interact 4 spindle drive won't turn on spindle
    By 0041601 in forum Bridgeport / Hardinge Mills
    Replies: 7
    Last Post: 06-23-2008, 11:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules