586,000 active members*
4,764 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mazak, Mitsubishi, Mazatrol > someone with an M3 or M3xx control, and an MC741, MC742, or MC744 memory board

Thread: someone with an M3 or M3xx control, and an MC741, MC742, or MC744 memory board

Results 1 to 2 of 2
  1. 06-27-2022, 10:57 PM #1
    MrMetric
    MrMetric is offline Registered
    Join Date
    Nov 2012
    Posts
    367

    someone with an M3 or M3xx control, and an MC741, MC742, or MC744 memory board

    If you press your ALARM button, then go to the second page of NC SPEC, and you see an MC741, MC742, or MC744 in your board set listing, I definitely want to hear from you! I am trying to make sense of some parameters. I'm also interesting if you see an MC852 or MC853 in your listing (I'm assuming you have an MC161 or MC161-1 there for your CPU).

    I absolutely am looking for something that can give me some basic information about the way their machine is configured so I can figure mine out. Nothing hard, just a little configuration information.

    Thanks!
    Reply With Quote Reply With Quote
  2. 06-28-2022, 06:14 AM #2
    MrMetric
    MrMetric is offline Registered
    Join Date
    Nov 2012
    Posts
    367

    Re: someone with an M3 or M3xx control, and an MC741, MC742, or MC744 memory board

    also the first page of the NC SPEC page, come to think of it... That has the firmware version. I'm trying to determine if that is relevant.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Ultimax II Memory board batteries
    By gthlm in forum HURCO
    Replies: 37
    Last Post: 11-10-2019, 05:37 PM
  2. is my memory board blown?
    By fenderrrex in forum Fanuc
    Replies: 2
    Last Post: 11-04-2013, 11:15 AM
  3. Control Board Memory Can it be increased?
    By MTBBasstit in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 09-01-2013, 10:19 PM
  4. Yasnac MX-3 MM21-6 board memory
    By showtime in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 04-29-2011, 06:20 PM
  5. Memory board repair?
    By SIG in forum Fadal
    Replies: 3
    Last Post: 08-18-2010, 07:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules