565,202 active members*
4,338 visitors online*
Register for free
Login

Thread: Won't Home

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2008
    Posts
    32

    Won't Home

    Hi
    I have a Sharp SV-2412 with the Fanuc Oi-MB control and when I try and home it the -Y- axis feeds the wrong direction. Any ideas on what might be a fix for this?

  2. #2
    Registered
    Join Date
    Sep 2011
    Posts
    13

    Re: Won't Home

    Quote Originally Posted by jeffm View Post
    Hi
    I have a Sharp SV-2412 with the Fanuc Oi-MB control and when I try and home it the -Y- axis feeds the wrong direction. Any ideas on what might be a fix for this?
    I have the same machine and have been having issues where i had to redo all the parameters by hand..... Anyways I ran into the same issue and it was servo setting do you have a backup of the parameters?

  3. #3
    Member
    Join Date
    Dec 2022
    Posts
    8

    Post Re: Won't Home

    I unquestionably advise contacting insulation and house repair businesses if you need repairs made fast and of high quality see here . After a year and a half of house repairs with many contractors, during which we frequently received subpar components that needed to be joined, we finally located a qualified crew that completed all of the house's repairs quickly, to our complete satisfaction, and to the highest possible standard.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •