[Okiebob]

We are setting up to purchase our first cnc for our cabinet shop. Small shop - 3 guys, so looking at used, under 40k machines. Have been exploring 5-8 year old ShopSabre IS510’s, or 10-12 year old Weeke Profiline BHP 007/510’s. The Weeke uses Woodwop, while the ShopSabre looks to be G code. Any thoughts on which machine would be better for first timer? We average two large kitchens a month, so not high volume, but they are high end. Thanks for any assistance! Bob

[JWHMILLWORK429]

We are setting up to purchase our first cnc for our cabinet shop. Small shop - 3 guys, so looking at used, under 40k machines. Have been exploring 5-8 year old ShopSabre IS510’s, or 10-12 year old Weeke Profiline BHP 007/510’s. The Weeke uses Woodwop, while the ShopSabre looks to be G code. Any thoughts on which machine would be better for first timer? We average two large kitchens a month, so not high volume, but they are high end. Thanks for any assistance! Bob

We have a IS510 we just purchased and it works great very simplw