Killed my Nvem v2 6 axis ethernet..trying to update software but nothing work not connecting help please only ping work
Killed my Nvem v2 6 axis ethernet..trying to update software but nothing work not connecting help please only ping work
What made you try to update it?.
I don't think these have had any software update since win10 was released!!!!!.
My guess is you have broken the plugin .dll or .bin files.
This is a problem so many people have had and resulted in them throwing the control out because the manufacturers download files have disappeared since 2017.
There are the odd couple of posts out there where people have shared their files so you'll have to have a good search about.
The only thing I have for you to try is to see if there is anything on this site to try and re-install it:
https://bulkman3d.com/resources/
Tancks for feedback but i my case nothing work , only ping work , removing flash and program is possible ? i have RT809H programer ?
Here is a Video that may help you, there is information on their web site as well. https://www.youtube.com/watch?v=q2ZARCJ5iNU&t=6s
https://www.nvcnc.net/nvem.html
Mactec54
Nothing work i have only ping on ip 192.168.1.249
I have reponse but dont work
Sem Título.bmp