Hi,
I am trying to cut this special material
Its formed with rubber (red/black) sheet with sponge (purple)
Total thickness is about 2.0mm and I want to make clean edge cut with CNC
One more thing to add is that rubber side will always touching the CNC bed side
I know tangential knife or drag knife will do the job but that's not an option that I have at this moment.
Please feel free to suggest me anything.
Thanks,
Results 1 to 2 of 2
-
07-10-2022, 07:20 AM #1
- Join Date
- Jul 2022
- Posts
- 10
End mill suggestion for special material
-
07-10-2022, 10:50 AM #2
- Join Date
- Jul 2022
- Posts
- 10
Re: End mill suggestion for special material
Another close look of material
In this picture, red part is rubber, and orange part is sponge.
Reply With QuoteSimilar Threads
-
Need material help / suggestion
By manakawari in forum Material Machining SolutionsReplies: 3Last Post: 09-01-2016, 06:01 PM -
Looking for micro end mill for plastic material
By Yordanu in forum CNC ToolingReplies: 2Last Post: 08-13-2015, 11:32 AM -
End mill bit material
By ALO in forum X3/SX3/G0619/G0463Replies: 0Last Post: 04-13-2013, 06:26 AM -
Using fly cutter vs End mill end for flatten material
By Micro Milling in forum MetalWork DiscussionReplies: 5Last Post: 04-01-2010, 01:07 AM -
special ball end mill
By 98vert in forum Metalworking- / Woodworking Tooling / Manual MachiningReplies: 3Last Post: 12-14-2006, 10:35 PM
Tags for this Thread
Posting Permissions
