Hey folks! I need some help on how to get a program into my controller. Okuma mill with an OSP5020M control. I've got a portable DNC box and the RS232 cable is hooked up. I've been able to send a program to the DNC but not from the DNC to the machine. I'm not sure I'm talking to it correctly. I've tried PIP read .. nothing .. I've tried PIP CN0 .. nothing. How do I do it? What is it looking for? I have a $xxxx.min% at the beginning of the program and a % at the end. It's driving me crazy.
Results 1 to 2 of 2
Hybrid View
-
07-11-2022, 05:19 PM #1
- Join Date
- Jul 2022
- Posts
- 1
Need help loading a program into an OSP5020M control
-
07-12-2022, 10:05 PM #2
Registered
- Join Date
- Nov 2007
- Posts
- 352
Re: Need help loading a program into an OSP5020M control
RS232 cable is null modem ?
WIll only allow download to PC not upload to machine if its the wrong type
Reply With QuoteSimilar Threads
-
EMCO 120/Emco Control - Loading Program from Windows Based (like Cimco, etc)
By kempmetal1945 in forum EMCO CNC MachinesReplies: 16Last Post: 01-28-2022, 02:58 PM -
Loading NC program
By data-matique in forum HURCOReplies: 8Last Post: 06-17-2018, 03:43 AM -
LOADING PROGRAM
By SELECT in forum SIEMENS -> GENERALReplies: 7Last Post: 07-08-2010, 05:48 PM -
loading program
By SELECT in forum Haas MillsReplies: 4Last Post: 08-14-2008, 12:31 PM -
help with loading program from card to oi fanuc control
By dismal in forum Daewoo/DoosanReplies: 4Last Post: 03-22-2007, 04:00 AM
Tags for this Thread
Posting Permissions
