[aljankowski]

My system has been running fine but all of a sudden I'm getting pop ups that claim my license is missing or invalid which causes the software to stop working. So I updated everything and went to the license page and put my license number in the box but I'm still getting the pop up. I've never seen this problem before, has anybody else had this problem and solved it? When I complete the license installation my green light in the lower right corner has an X on it which means it is not finding the correct license.

[Teketeke]

My software has exactly the same issue.

[cVos]

same here

[PlanetCNC]

Hi,

We are aware of the recent license issues due to certificate.

Below is the link, to the version of SW TNG that will not cause any
problems with your license validation due to the certificate.

for 64-bit systems:
https://planet-cnc.com/wp-content/up...2022-08-08.zip

For 32-bit systems:
https://planet-cnc.com/wp-content/up...2022-08-08.zip

Download and extract the files from links above. Copy the .dll and .exe files and place them into
your normal PlanetCNC install folder.

Please note, that with this version, OS will notify you that you are executing untrusted sw.

This is a temporary solution, and we are working with SSL.com to fix this issue ASAP.
Expect a new version in a few days.

We apologise for inconvenience and thank you for understanding.

[MrEmo]

Download link is not working?

Hi,

We are aware of the recent license issues due to certificate.

Below is the link, to the version of SW TNG that will not cause any
problems with your license validation due to the certificate.

for 64-bit systems:
https://planet-cnc.com/wp-content/up...2022-08-08.zip

For 32-bit systems:
https://planet-cnc.com/wp-content/up...2022-08-08.zip

Download and extract the files from links above. Copy the .dll and .exe files and place them into
your normal PlanetCNC install folder.

Please note, that with this version, OS will notify you that you are executing untrusted sw.

This is a temporary solution, and we are working with SSL.com to fix this issue ASAP.
Expect a new version in a few days.

We apologise for inconvenience and thank you for understanding.

[maki]

probably because there is a new wersion out...

[MrEmo]

probably because there is a new wersion out...

I figured that out eventually.