Hello,
We have a Amada Vipros 2510C TPP.
It was working fine till 5 PM one day. Next day the Hydraulic System wouldn't turn ON automatically throwing error of "Hyd motor thermal trip" & "Stripping".
We checked the contactor and it was not activating automatically. But if we press the contactor button manually, hyd system would turn ON. We tried resetting it using the red/blue buttons but in vein. After further troubleshooting, we noticed that the DC line which is supposed to give signal to the contactor to turn ON was not giving signal to contactor.
For stripping, we tried switching OFF the "Strip miss" knob in contol board of machine but still it was throwing stripping error.
We invited our regular maintenance guy where he noticed one of the red LEDs (LED8) on the main motherboard (PHNC Card) was lit. We noticed as soon as we turn ON the main MCB of machine, it the red LED would turn ON even if we do not switch on the machine.
Now the issue is, we do not have manual of the machine nor we could find it with all our known resources, people. My maintenance guy says it is very hard to find documentation for the PHNC card/machine.
I am attaching the PHNC card photo below and also the card number is H0400B-SPHNC-010.
I am looking for solutions so as to what this RED LED is indicating to me. Like what part of the card is not working which is indicated by this red LED (LED8). You can see the lit LED on the attached image.
Can anyone help out if you have any circuit diagram of this board / Operators manual for Amada Vipros 2510C ?