Hi all
Just started a new job and I have been running fanuc machines in those machines we are able to store multiple programs ... i can't seem to be able to figure out how to load multile programs at the moment the machine will only over write the current file (A.MIN)

i have tried this but it has no effect on making a new main program anyone have words of wisdom..

this new machine to me is an OSP U10L sorry I left that info out


much appreciated

$B.MIN%
O0067(OKUMA OP1)
(*)
N1 G00 X25.0 Z25.0
G50 S2800
G90 M41 ( LOW RANGE )
T0101 M08 ( TOOL# OK0510 CNMA-643 80-DEG. O.D. FACE AND TURN TOOL )
G95 G96 S600 M03
X4.536 Z1.
X4.5 Z3.1975
G73 U500 W30 R5
G73 P101 Q102 U50 W20 F.009
N101 G1 X5.0
N102
G0 Z1. M09
X25. Z25. M09
M02
%