585,556 active members*
3,476 visitors online*
Register for free
Login

Thread: H100 vfd

Results 1 to 3 of 3
  1. 07-26-2022, 10:05 PM #1
    JDMTA
    JDMTA is offline
    Join Date
    Jul 2022
    Posts
    1

    H100 vfd

    I set p080=4 now the vfd runs on startup and I can't stop or reset

    And YES IKNOW I F ed up. Anyone now how to shut down/stop
    Reply With Quote Reply With Quote
  2. 07-27-2022, 05:16 PM #2
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: H100 vfd

    Quote Originally Posted by JDMTA View Post
    I set p080=4 now the vfd runs on startup and I can't stop or reset

    And YES IKNOW I F ed up. Anyone now how to shut down/stop
    What is the Manufacturers name of the VFD Drive H100 does not mean much

    Or if you have a link to the PDF manual would also work
    Mactec54
    Reply With Quote Reply With Quote
  3. 07-28-2022, 02:03 PM #3
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: H100 vfd

    Quote Originally Posted by JDMTA View Post
    I set p080=4 now the vfd runs on startup and I can't stop or reset

    And YES IKNOW I F ed up. Anyone now how to shut down/stop
    Ok, I have the Manual so check to see if F000. =0 if (1) the Parameters are locked you can disconnect the spindle while trying to get it working again

    Just set P080=0 back to (0) for normal operation, if you can't Reset this Parameter, you will have to do a Factory Reset, and reprogram the Drive to suit your spindle specs
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Huajiang VFD H100 and 1.5KW Spindle Speed Control
    By clockstick in forum Spindles / VFD
    Replies: 19
    Last Post: 09-18-2023, 02:39 AM
  2. H100-2.2C2-1B VFD to C11G Board
    By bigrock in forum Spindles / VFD
    Replies: 3
    Last Post: 05-23-2023, 09:28 PM
  3. PRT-E1500W VFD CNC60/90 locked out - cant change VFD settings, flashing 50.00
    By nheydari in forum Chinese Machines
    Replies: 1
    Last Post: 10-09-2019, 01:25 AM
  4. Implementing VFD control on the G540 - into a non-VFD variable-Vin PWM controller
    By OddOne in forum Gecko Drives
    Replies: 1
    Last Post: 01-04-2014, 01:43 AM
  5. doosan ACE-H100 pallet APC arm return fault
    By suresh patil in forum Daewoo/Doosan
    Replies: 2
    Last Post: 10-01-2007, 04:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules