[vinatron]

Hello I recently purchased a Bridgeport CNC mill with a DX32 controller and am looking for anyone with information or copies of software for this machine and also what the backup procedure is. I am looking to put windows 3.1 on it because it currently doesn’t have it installed I also wanted to add EZ-Path conversational and the NC plotter. Also I would like any information on the TorqCut22 as far as the optional 4th axis rotary and the probe interface. I have everything working great so far all I need is new seals on the shift cylinder but other than that it’s a low hour machine and physically in nice condition. This is my first machine and I have lots of experience with DOS and Windows I just don’t have a lot yet with the DX32 controller. Thanks for your time I’m looking to hearing from anyone who can help!

[forhire]

For probing look at this thread:
https://www.cnczone.com/forums/bridg...nivations.html

Indexer wiring:
https://www.cnczone.com/forums/bridg...-software.html

USB, LANMAN, and FTP along with a bunch of other stuff in a LONG thread:
https://weldingweb.com/vbb/threads/2...ew-(to-me)-VMC