Hi I have a new lathe Fanuc 0-TD controller. As title suggests, if I flick the on switch and the phase sequence is wrong could I destroy the machine?
I was going to turn on the mains power briefly, check the coolant pump rotation, and reverse if need be.
Results 1 to 2 of 2
Hybrid View
-
08-02-2022, 02:33 PM #1
Registered
- Join Date
- Mar 2017
- Posts
- 98
Fanuc 0TD Phase sequence - if I get it wrong what happens?
-
08-02-2022, 03:14 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Re: Fanuc 0TD Phase sequence - if I get it wrong what happens?
Normally the machine will not power up if the phase rotation is wrong, until corrected.
But IIRC the 0 controller itself does not require correct phase rotation as the earlier systems do.
Only the 3ph motors external to the system.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Fanuc 0TD
By PS85 in forum FanucReplies: 3Last Post: 10-13-2020, 12:46 AM -
error wrong PLC sequence in RAM
By kallejojje in forum Controller & Computer SolutionsReplies: 4Last Post: 10-09-2020, 09:25 PM -
Fanuc 0TD
By PS85 in forum Haas LathesReplies: 1Last Post: 10-08-2020, 03:52 PM -
Posting Toolpaths in WRONG SEQUENCE
By fidia in forum BobCad-CamReplies: 27Last Post: 11-12-2012, 04:03 PM -
Chuck indexing on a Fanuc 0TD..
By patrickb in forum FanucReplies: 28Last Post: 09-04-2009, 01:02 PM
Tags for this Thread
Posting Permissions
