Hi,
A while ago I converted a Sieg X2 to full CNC and one thing I had issues with is finding an enclosure. In fact I couldn't find one so ended up making one so I could run an air cooling system and have the mill in my living room (I'm single what can I say). I'm curious, I can make the enclosures and am wondering if anybody would be interested, they would retail for around $1000 bucks and I could make it large enough for either an X2 or X3 conversion, you could seal it with calking, add some drain holes and run a coolant system. Really I am trying to gauge interest. Just the enclosure, full 24" opening doors, side windows that also open, measurements are 24"x24"x44, 16 gauge steel, perspex windows, but as I said I could make it bigger to accommodate an X2 or X3 mill. Curious to know peoples thoughts. Thanks.