585,761 active members*
4,128 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Weeke BHC 550 - Disable Front Tool Changer

Thread: Weeke BHC 550 - Disable Front Tool Changer

Results 1 to 1 of 1
  1. 08-03-2022, 02:31 PM #1
    HughDuffStephen
    HughDuffStephen is offline
    Join Date
    Aug 2022
    Posts
    1

    Weeke BHC 550 - Disable Front Tool Changer

    Hi, we have a Homag Weeke 550 with a front and rear tool changer (both 8 tool). But the motor on the front tool changer has burnt out, meaning the machine cannot run the reference routine (stops at SYNC M100). The KEB Invertor 2 also comes up with a error message (E.UP) as soon as the machine is turned on but I think this is related to the burnt out motor.
    Is anyone aware of a way of bypassing the front tool changer too allow us to have some functionality with the rear?

    Thanks for any advice,
    Hugh
    Attached Thumbnails Attached Thumbnails IMG_20220803_124454.jpg   IMG_20220803_124501.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Weeke BHC 550 problem
    By Tajson in forum CNC Machining Centers
    Replies: 11
    Last Post: 10-12-2022, 05:06 AM
  2. Weeke Optimat BHC 550 Spoilboard Surfacing
    By alexbuckley5 in forum CNC Machining Centers
    Replies: 0
    Last Post: 12-13-2019, 02:34 PM
  3. Weeke BP 150 and Weeke BHC 350 Referencing In X Axis Problem
    By bedslouki in forum CNC Machining Centers
    Replies: 0
    Last Post: 03-01-2018, 11:52 AM
  4. Weeke Optimat BHC 550
    By 9r2a5m70 in forum CNC Machining Centers
    Replies: 0
    Last Post: 01-06-2015, 02:55 PM
  5. Weeke BHC-550 ball screw and nut needed!
    By booseman90 in forum CNC Machining Centers
    Replies: 1
    Last Post: 10-01-2010, 08:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules