I bought this for a personal job at work and the machine we have doesnt have the coolant pressure or RPM to run this drill. So I hope someone can use it. Its a .246" diameter x 7" flut length and 10" overall length. 3/4" shank. It was installed over a weekend and had coolant run through it. But never made a chip. Carbide tipped and ready to make chips. Asking $75 plus shipping. Paypal Only please.

Click image for larger version. 

Name:	20220726_173010.jpg 
Views:	0 
Size:	38.9 KB 
ID:	483452
Click image for larger version. 

Name:	20220726_173017.jpg 
Views:	0 
Size:	65.7 KB 
ID:	483454
Click image for larger version. 

Name:	20220726_173031.jpg 
Views:	0 
Size:	74.3 KB 
ID:	483456
Click image for larger version. 

Name:	20220726_173039.jpg 
Views:	0 
Size:	87.1 KB 
ID:	483458