584,829 active members*
5,330 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Message "Autorization Required" help, how quit this?
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2016
    Posts
    4

    Message "Autorization Required" help, how quit this?

    hi everyone


    first I explain my problem, I have a cincinnati 500 arrow 2, it failed 1 year ago, I try to repair it, but several problems have come up, I leave images if you can help me.
    I know that one is for a configuration of the profibus dp cable, but I do not know the configuration of the switches of the same cable.
    Click image for larger version. 

Name:	20220907_112419.jpg 
Views:	1 
Size:	89.3 KB 
ID:	484189 Click image for larger version. 

Name:	20220907_112427.jpg 
Views:	1 
Size:	96.4 KB 
ID:	484191Click image for larger version. 

Name:	20220909_103353.jpg 
Views:	1 
Size:	96.0 KB 
ID:	484193Click image for larger version. 

Name:	20220907_113638.jpg 
Views:	1 
Size:	104.9 KB 
ID:	484195

  2. #2
    Join Date
    Mar 2011
    Posts
    460
    Need more info to try and help you. Your title is about authorization required, your question seems to be about Profibus.

    I dont see any attachments so cant refer to them.


    The Profibus question has already been asked and answered...how many and where they are located depends on your exact config, but essentially only the terminating connectors should be "ON", the rest are off.

    Authorization required...this is typically from people swapping components between machines. It basically says the serial number on hard drive does not match serial number of control. If you haven't swapped components, it is possible the Serial number chip is not connected properly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •