We have TRAUB TND 300 CNC lathe (2 axis) with System TX8 controller.The following problem has occurred:
At start-up in the morning, the Part 2 system button on the control panel illuminated. So far, No. 1 has always been lit. For some reason, we can’t get out of No. 2. The keyboard works, but Even if I press the button, it doesn't turn it off.
Can a parameter loss be the cause? How do I turn off System 2?
Thank you in advance for your response
Results 1 to 3 of 3
-
11-18-2021, 01:24 PM #1
Registered
- Join Date
- Jun 2016
- Posts
- 4
TRAUB TND 300 two subsystems selected
-
08-26-2022, 05:50 AM #2
- Join Date
- Aug 2022
- Posts
- 1
Re: TRAUB TND 300 two subsystems selected
how did you solve the problem?
-
08-26-2022, 06:01 AM #3
Registered
- Join Date
- Jun 2016
- Posts
- 4
Re: TRAUB TND 300 two subsystems selected
The problem still hasn't been solved. The machine does not work because of the error.
Reply With QuoteSimilar Threads
-
Traub TND 254
By swat cat in forum Dynomotion/Kflop/KanalogReplies: 37Last Post: 03-01-2021, 06:58 PM -
TRAUB TND 256 TX7
By swat cat in forum Index and TraubReplies: 0Last Post: 12-26-2019, 08:57 AM -
Need help traub tnd 400
By Jose729 in forum TurningReplies: 0Last Post: 11-22-2019, 11:10 PM -
Traub tnd 400
By Jose729 in forum Controller & Computer SolutionsReplies: 0Last Post: 11-16-2019, 09:03 PM -
traub tnd 350g
By ironofeden in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 07-22-2011, 06:06 PM
Tags for this Thread
Posting Permissions
