[KokaneeMatt]

Hey everyone,

It would be great to get a complete list with the definitions and instructions of the parameters for my Mazatrol T-1 control which is on my QT-20. I have the parameters backed up but I would love to know what all of them mean. I keep finding helpful bits of information for this machine over the years but the answers are often hard to locate.

Specifically one of the parameters I'm trying to find is to change the dwell time at the beginning of a program?

Thanks in advance for any help that you can offer.

Matt.

[KokaneeMatt]

Another one I'm looking for is backlash adjustment for x and z axis motors.

[KokaneeMatt]

Well if anyone is interested... just from messing around and trying things I found the backlash is the first one on page two, BL for either X or Z. Seems pretty obvious now but I'm still uncertain about almost all the rest.

[Al_The_Man]

Send me an email add. and I can send what I have, par definitions etc.

[KokaneeMatt]

Hey Al, I pm'd you. Thanks for your help.

[Caressemazzone]

i have an additional inquiries if its too much trouble guide me about this. These inquiries are displayed underneath here:https://magnum4d.me/ Thanks

[andyj67]

Evening all, I have QT20 Universal with a T1 and am trying to work out the tool change position.
The manual isn't very clear on the parameter setting.

I have one setting P8, which is listed as the correct parameter to change, 0, 1, 2, or 3. However in the paramter listing for the machine, P8 should be set to 1 as its a universal machine.

Can anyone offer any sugestions?

Thanks Andrew.