584,808 active members*
5,114 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2021
    Posts
    8

    Create a tool change cycle TNC 310

    Hello, friends. A 3-axis milling machine with a TNC 310 stand came to our Ukrainian enterprise. But the problem is that this machine does not have a tool changer. We want to put 4 cells with mandrels on the side and organize a simple tool change system. But I ask for help, who knows how to prescribe the M06 cycle for the correct operation of this system? This is necessary for the speedy victory over the enemy.

  2. #2
    Join Date
    Sep 2021
    Posts
    8

    Re: Create a tool change cycle TNC 310

    Help. The machine DMU 50 and TNC310 does not move on two or three axes at the same time. Writes that the function is disabled in the plc. How can I make it move along two and three coordinates at the same time?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •