[Matt-y]

Hi, I am selling my friendly 4 ft by 9 ft CNC Router. It has linear rails and bearing on all axes. Ball screws on the Z and X. Hardened rack and pinion on the Y. The spindle is a 2.2 kw (~3hp) water cooled unit. Control is via a MASSO G2. Cost is $9,900.

See the router in action: https://youtu.be/74KCnFVUZBM

The Variable Frequency Drive that controls the spindle is a 7.5kw Huanyang GT series unit. It takes 220 volt single phase power.

All motors that control the position of the spindle are stepper motors. One motor for X and Z. Two motors for Y. They are controlled by the MASSO via Gecko drives.

It is located in Poulsbo Washington. Please call if you have questions 206 849 6584.

The router is big but we got it here on a rented trailer used to tow a car. You don't need professional movers.