[Mhook]

The award for the most ridiculous and difficult post processor editing should go to Solid Cam software! To edit the simplest things in the post processor of SolidCam, you have to waste a lot of time, neither in Powermill, nor in hsmworks, nor in the nxcam software!!!, I had no problems in creating and editing the simple post processor in other cam software, but then it's a total waste of time in SolidCam, I have to say it's a completly ****!

If we want to write 4 formulas in the solidcam post processor, we must be mathematicians! Damn the crappy company that doesn't even have a forum, stingy people

[Armageddon]

Crying at the highest level

[anzory]

That's a lie.
Here's the forum: https://forum.solidcam.com/
Here's the GPP language help: https://solidcam.help/
Here is an excellent editor for GPP: https://bit.ly/3fqkPD8

Enjoy

[Mhook]

That's a lie.
Here's the forum: https://forum.solidcam.com/
Here's the GPP language help: https://solidcam.help/
Here is an excellent editor for GPP: https://bit.ly/3fqkPD8

Enjoy

Solidcam = give me money ! give me money ! more and more !!

Nothing positive comes from all these Websites!!
Except that the employees themselves post advertisements for Solidcam !!!!

[Armageddon]

Nothing positive comes from all these Websites!!

So many posts from you in the forum and so many exclamation marks. Every post in the forum is just complaining about something.

All necessary information can be found in the GPP help. The SolidCAM GPP language is the easiest to learn compared to other postprocessor languages. As simple as Basic on a Commodore C64 back then. Of course, it could be that some stuff needs another method to reach the goal. But so far, standard milling machines up to simultaneous milling machines and standard Mill-Turn up to the most complex multichannel swiss type machines are being realized with the SolidCAM GPP language without any issues and without making the postprocessor to complicated.

[Mhook]

So many posts from you in the forum and so many exclamation marks. Every post in the forum is just complaining about something.

All necessary information can be found in the GPP help. The SolidCAM GPP language is the easiest to learn compared to other postprocessor languages. As simple as Basic on a Commodore C64 back then. Of course, it could be that some stuff needs another method to reach the goal. But so far, standard milling machines up to simultaneous milling machines and standard Mill-Turn up to the most complex multichannel swiss type machines are being realized with the SolidCAM GPP language without any issues and without making the postprocessor to complicated.

None of your business. How much SENT I posts? Are you the owner of this website?
THX!!!!!!!!

[Armageddon]

Just calm down. I mean posts (contributions) and not postprocessors. I don't own this site, but if someone is just complaining, I just can't stop myself from voicing my point of view.