i am looking to program a button for and offset for an opti laser on WINCNC and make it a button on the WINCNC control panel, i already have the x,y, offsets and would like to beable to set z from the auto tool hieght tool on the machine. any sugestions or codes would be welcomed.
thanks
Ron
Thread: need to program a button
Results 1 to 1 of 1
-
10-24-2022, 09:22 AM #1
- Join Date
- May 2022
- Posts
- 2
need to program a button
Reply With QuoteSimilar Threads
-
OSP 3000L control load program button issue
By vandytech in forum OkumaReplies: 1Last Post: 06-03-2020, 02:22 AM -
Set Cycle Start Button in KmotionCNC by .c program
By felluco in forum Dynomotion/Kflop/KanalogReplies: 1Last Post: 03-19-2019, 04:39 PM -
Fanuc 1 button home program call throught ladder
By Harmeet in forum FanucReplies: 5Last Post: 09-26-2013, 08:49 AM -
program axle movements without L button
By willi1681 in forum HEIDENHAIN -> TNCReplies: 1Last Post: 09-10-2011, 12:33 AM -
Laoded my first program, hit the green button...
By l u k e in forum Haas MillsReplies: 25Last Post: 03-26-2011, 02:39 AM
Tags for this Thread
Posting Permissions
