Hello
Some time ago my matsura MC510VG J300 control was damaged. All parameters have been lost.
I got the parameters from matsura. But after entering all of them, my nikken Cnc 170 divider does not work.
It was controlled by the M-code M11. The rotation by a given value is controlled from a separate panel.
Does anyone on the forum knows what parameters need to be changed so that the machine can see the dividing line and be able to control it.
And on a different note, does anyone know how to change the orientation of the spindle after replacing the plate springs in the spindle?
Parameter 1414 tried and value 4 and value 1000 but after entering M19 it is set the same
Thank you for any help
Thread: Matsuura 4 axis
Results 1 to 1 of 1
-
11-26-2022, 11:47 AM #1
- Join Date
- Dec 2021
- Posts
- 5
Matsuura 4 axis
Reply With QuoteSimilar Threads
-
matsuura 4 axis post
By MACHINEFREAK in forum GibbsCAMReplies: 0Last Post: 03-04-2018, 08:49 PM -
Matsuura mx-1 Cannot Zero Return Any Axis
By arlynjames in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 10-02-2014, 12:05 AM -
Methods and Matsuura Announce New US Matsuura Product Manager
By Pam Laite in forum News AnnouncementsReplies: 0Last Post: 08-30-2011, 05:27 PM -
Matsuura RA 1 y axis interlock on!!
By marcov in forum DNC Problems and SolutionsReplies: 0Last Post: 07-18-2011, 04:04 AM -
PSS1 and PSS2? matsuura Y axis.
By integerspin in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 03-01-2009, 08:18 PM
Tags for this Thread
Posting Permissions
