[Makro40]

Hello
I have a Matsuure MC510 VG with 4th nikken (cnc170). J300 control
Some time ago my computer crashed
I got the parameters from matsuura. I typed first
optional parameters followed by Sequence parameter and other parameters
I also have programs loaded from the machine above O9000
But when I try to call the tool in MDI, e.g. T2M6, the message 2180 Sequence Error pops up
Neither can I make the divisor rotate with the M11 command. This is how I was doing the rotation before.

[freakycnc]

Makro40,
2180 is an indicator that the PLC is in alarm. To read the alarm you must go to ALARM then "USER" soft key for details of the message.

[Makro40]

I have noticed one more thing. When I enter all the parameters and base the x. Y, Z axes and I will not move the Z axis, the machine changes the tools.
However, as soon as I run the machine from the program and the Z axis moves, then error 2180 Sequence Error pops up. As if it didn't know where to go for a tool change.

[Makro40]

Below are pictures from the alarm