Hello everyone,
I just got a Chinese 6040 USB Mach3 CNC machine.
The board is a BSMCE04U-PP and the VFD is a PRT-E1500W.
The problem is that I can't control the spindle with Mach3. It works in manual mode!
I have tested several spindle configurations in the Mach3 configuration.
Does anyone have any ideas about the problem?
Results 1 to 1 of 1
-
09-06-2023, 11:30 AM #1
Registered
- Join Date
- Dec 2013
- Posts
- 1
BSMCE04U-PP and the VFD is a PRT-E1500W
Reply With QuoteSimilar Threads
-
6040 cnc PRT-E1500W vfd settings.
By koolkleptokidd in forum Chinese MachinesReplies: 132Last Post: 05-04-2021, 04:23 PM -
cncest 6040 with a PRT-E1500W vfd with usb AVI problem
By JLB1 in forum Chinese MachinesReplies: 1Last Post: 02-20-2021, 11:17 AM -
PRT-E1500W 110V VFD SETTINGS for USB CNCEST-6040T
By mjmurphy99 in forum Chinese MachinesReplies: 10Last Post: 07-10-2020, 02:46 AM -
PRT-E1500W VFD CNC60/90 locked out - cant change VFD settings, flashing 50.00
By nheydari in forum Chinese MachinesReplies: 1Last Post: 10-09-2019, 01:25 AM -
6040 cnc PRT-E1500W vfd problem
By koolkleptokidd in forum Spindles / VFDReplies: 2Last Post: 03-18-2018, 11:52 PM
Tags for this Thread
Posting Permissions
