Please for help ... I have Alarm EX 056 ATC INTERLOCK (TWIN ARM) what it means and what I must can do ..... Please tel me were i can find list all EX alarms machine is KURAKI KBT 11 WDX - Horizontal Boring & Milling .. Programing Funaci .. THANK YOU :wave:
Thread: KUNAKI - Fanuc 15M
Results 1 to 4 of 4
-
11-08-2012, 11:43 PM #1
Registered
- Join Date
- Nov 2012
- Posts
- 0
KUNAKI - Fanuc 15M
-
11-10-2012, 07:18 AM #2
Junior Member
- Join Date
- Dec 2009
- Posts
- 54
Assuming this is a KURAKI.
The "Twin Arm" is the tool changing arm.
You should look up "EX056" in the error codes in the back of your manual for specifics.
Possibly your tool changing arm is out of position or you have a faulty limit switch, hydraulic solenoid, or your hydraulic pressure is low.
-
02-21-2020, 01:46 AM #3
Registered
- Join Date
- Sep 2010
- Posts
- 80
The tool trolley is out of position. Do you still have the issue?
Originally Posted by valentin zalik
-
12-08-2022, 11:36 AM #4
Registered
- Join Date
- Nov 2008
- Posts
- 37
Hi, Do you still have this kuraki? Originally Posted by valentin zalik
I lost parameter on this kuraki unlucky I don't have backup keeprelay, timer and counter. If you don't mind to share these parameters, thank you for your kindness
Reply With Quote
Posting Permissions
