584,874 active members*
5,120 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC "do-it-yourself" > DIY mpg handwheel for USB mach3 board
Results 1 to 1 of 1
  1. #1
    Join Date
    Aug 2014
    Posts
    1

    DIY mpg handwheel for USB mach3 board

    I need some help here; I'm making my own MPG pendant. I'm using this 80mm mpg handwheel and this USB mach3 board. I know the wiring is correct, ports & pins configurated as you can see in the attached images, input #1, input #2, input #3, input #4 checked, encoder 1, MPG#1 checked.
    Looking at the diagnostics window I know I have signal in the input 3 and input 4, but looking at the settings info window, MPG diagnostics, nothing moves.
    Any idea about what I'm doing wrong.
    Attached Thumbnails Attached Thumbnails mach3 image3.jpg   mach3 image4.jpg   mach3 image5.jpg   mach3 image1.jpg  

    mach3 image2.jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •